GAS FITTERS

GAS FITTERS

COURSE INTRODUCTION
Gas Supply Regulations 1997 ” Every work on a gas installation shall be supervised by a competent person employed by the Gas Contractor who is carrying out the installation work”.

COURSE OBJECTIVE
To train local fitters in gas engineering technology on low and medium pressure reticulation system (LPG and Natural Gas) for housing, commercial and industrial areas in line with requirements of Malaysian Gas Supply Act (1993) and Gas Supply Regulations (1997)

POTENTIAL CANDIDATES
Technicians
Site Supervisors
Gas Contractors with / without registration with PKK, CIDB and Energy Commission
Future Gas Contractors
Individual involved in the gas industry

ENTRY REQUIREMENTS
The minimum entry requirement is at least possess a Sijil Pelajaran Malaysia (SPM)
One year experience in any gas installation
Ability to converse and literate
Age of 18 and above

COURSE DURATION
The course will be on PART TIME and IN-HOUSE basis. Class will be held on Saturdays and Sunday once in every two weeks. The overall duration is estimated to be four to five months. while for IN-HOUSE basis, the course will be conducted at various locations including Kuala Lumpur, Alor Setar, Kota Bharu, Kuantan, Johor Bahru and Sabah. Candidates will be informed and updates on the closest location. If the number of participants is sufficient and participants are fully sponsored by a company, course could be conducted at the company’s premise.

CERTIFICATE
Certificate will be awarded to candidates after passing all the required modules and papers and completing all payable fees. The certificate will be issued by Universiti Teknologi Malaysia (UTM) upon the recommendation of the organizing committee. 

GAS FITTERS COURSE CONTENT AND SUMMARY
FITTERS CLASS I
GF1-01 : Piping System for NG & LPG III
GF1-02 : LPG Storage System II
GF1-03 : Pipes Sizing II
GF1-04 : Meter and Regulator Selection II
GF1-05 : Testing, Purging and Commissioning II
GF1-06 : Project Management II
GF1-07 : Corrosion Control
GF1-08 : Codes & Standards for Natural Gas LPG
GF1-09 : Gas Supply Act 1993 and Gas Supply Regulations 1997
Site Visit
Examination : Paper I & Paper II | Project Management
Course Duration: 3 Months (Part Time) | 2 Weeks (Full Time)

FITTERS CLASS II
GF2-01 : Piping System for NG & LPG II
GF2-02 : LPG Storage System I
GF2-03 : Pipes Sizing I
GF2-04 : Meter and Regulator Selection I
GF2-05 : Testing, Purging and Commissioning I
GF2-06 : Combustion Process
GF2-07 : Gas Burner System
GF2-08 : Venting System
GF2-09 : Control System
GF2-10 : Gas Pipe Welding
GF2-11 : Project Management I
GF2-12 : Codes & Standards for Natural Gas LPG
GF2-13 : Gas Supply Act 1993 and Gas Supply Regulations 1997
Site Visit
Examination : Paper I, Paper II, Paper III
Course Duration: 4 Months (Part Time) | 3 Weeks (Full Time)

FITTERS CLASS III
GF3-01 : Properties of Fuel Gases
GF3-02 : Piping System for NG & LPG I
GF3-03 : Inspection, Testing and Purging
GF3-04 : Service and Maintenance of Piping System
GF3-05 : Codes & Standards for Natural Gas LPG
GF3-06 : Gas Supply Act 1993 and Gas Supply Regulations 1997
Laboratory Practical Session
Site Visit
Examination : Paper I & Paper II
Course Duration: 2 Months (Part Time) | 2 Weeks (Full Time)

For inquiries, please contact secretariat, Pn. Rahmah at 011-37193265

ON GOING CLASS
GAS FITTER CLASS II (33 Series)
Date    :  22 February 2020
Venue :  MJIIT Building, UTM Kuala Lumpur
Download
Class Schedule

32 Comments

  1. Anis Abdul Rahman

    Dear Sir, may i know when will be the next gas fitter course (series 32)

    Reply
    • mprc

      Dear Anis, we will announce the registration for Gas Fitter Series 32 once we confirm the date. Please contact us at 07-5535653 for more inquiries.

      Reply
    • Amir m basir

      May i know when Will be next couse at sabah

      Reply
      • John

        Will there be and when will the course for Sarawak region.

        Reply
    • Syed Saiful Nizam bin Syed osman

      GF3-02

      Reply
  2. Lim

    Saya dari sabah, umur 36.sijil spm saya sudah hilang Lama, sekarang sebagai seorang contractor bina, adakah saya layak dengan syarat ni, tq

    Reply
    • mprc

      Hai Encik Lim.. Encik perlu mendapatkan sijil SPM itu semula bagi mengesahkan kelayakan encik untuk memasuki kursus ini.

      Reply
  3. Muhammad Noor Afnan

    Salam, jika tiada pengalaman boleh atau tidak..??

    Reply
  4. Badrul Bin Mustaffa

    Dear Sir,

    I’ve registered for the course, preferably I would like to be placed in the upcomimg class 22/06/2019, also would like to know the details of fees and payment arrangement for the course.

    Reply
  5. Kismet

    I would like to attend this course but I don’t have 1 year experience. Can I join this course?

    Reply
  6. Mohd azmen

    Boleh saya tau tak bila kos ni akan di buka lagi?

    Reply
    • mprc

      Encik Azmen, butir terperinci telah saya emel kan.

      Reply
    • Yvonne Ng

      Good day to you. Would like to know the next intake and info for gas fitter course. Thank you very much.

      Reply
  7. Michael Tan

    Hi, I met both the required requirements i.e. 1 year in the industry and SPM. I would like to attend the course. Please advice next intake and fees.

    Reply
    • Mok Wei Theng

      May I know when is the next intake for gas fitter course?

      Reply
      • mprc

        Dear Mr Wei Theng , we already email detail of the course.

        Reply
    • Chong Kin Leong

      May I know when is the next intake for gas fitter course?

      Reply
      • mprc

        Dear Mr Kin Leong , we already email detail of the course.

        Reply
    • mprc

      Dear Mr Michael, we already email detail of the course.

      Reply
  8. Ronny WONG

    Hi, Would like to know the next schedule for gas fitters course year 2020?

    Reply
    • mprc

      Dear Mr Ronny , we already email detail of the course.

      Reply
  9. amir m basir

    Tuan bila kursus akan di buat dan berapa lama kursus akan di jalankan

    Reply
    • mprc

      En Amir, kursus seterusnya bermula pada bulan 7. Kursus akan dijalankan dalam jangkamasa 4 bulan ,2 minggu sekali di UTM KL.

      Reply
  10. Chen Wei

    Dear Sir,

    1. May I know is there a full time course on gas fitter?
    2. Is the pipe fitter class has to follow sequence 1,2,3?

    Reply
    • mprc

      Hello sir,
      1. Only part time class at the moment.
      2. No need to follow sequence.Overall at one time.

      Tq.

      Reply
  11. anuar

    how i can attend FITTERS CLASS III .

    Reply
    • mprc

      Dear Mr Michael, we already email detail of the course.

      Tq

      Reply
  12. azizan bin musa

    Boleh saya tahu bila kursus ini akan dibuka lagi.

    Reply
    • mprc

      Kursus akan dibuka semula bermula 17/10.

      Terima kasih.

      Reply
  13. farahat hussain

    boleh saya tahu bila setiap kursus ni akan dibuka termasuk harga untuk setiap class

    Reply
    • mprc

      Saya telah emel butir-butir berkenaan.

      T.kasih

      Reply
  14. mprc

    Waslm Pn.

    Saya telah emel kepada puan.

    T.kasih

    Reply

Submit a Comment

Your email address will not be published. Required fields are marked *